You don’t have to prop up a drooping hood or hatch anymore. For a firm lift that won’t sag again, try ARANA hood struts for 1998 to 2002 Accord, PM3315 rear hatch shocks for 2015 to 2019 Fit, AiYiGu rear hatch shocks for 2003 to 2011 Element, liftgate struts for 2005 to 2010 Odyssey (non power), and ARANA struts for 2003 to 2008 Pilot. Next, you’ll see what to check before you buy.
| ARANA Hood Struts for Honda Accord 1998-2002 (2pcs) |
| Best Hood Upgrade | Vehicle fit: Honda Accord 1998–2002 (hood) | Location: Front hood | Quantity: 2-pack | VIEW LATEST PRICE | Read Our Analysis |
| PM3315 Rear Hatch Shocks for 2015-2019 Honda Fit (2-Pack) |
| Best for Honda Fit | Vehicle fit: Honda Fit 2015–2019 (rear hatch) | Location: Rear hatch | Quantity: 2-pack | VIEW LATEST PRICE | Read Our Analysis |
| Rear Hatch Shocks for 2003-2011 Honda Element (2-Pack) |
| Best for Element | Vehicle fit: Honda Element 2003–2011 (rear liftgate) | Location: Rear liftgate | Quantity: 2-pack | VIEW LATEST PRICE | Read Our Analysis |
| Rear Hatch Liftgate Struts for Honda Odyssey (2-Pack) |
| Best for Odyssey | Vehicle fit: Honda Odyssey 2005–2010 (rear liftgate, non-power) | Location: Rear liftgate | Quantity: 2-pack | VIEW LATEST PRICE | Read Our Analysis |
| ARANA Rear Hatch Liftgate Struts for Honda Pilot 2003-2008 |
| Best for Pilot | Vehicle fit: Honda Pilot 2003–2008 (rear hatch) | Location: Rear hatch/tailgate | Quantity: 2-pack | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
ARANA Hood Struts for Honda Accord 1998-2002 (2pcs)
Should you drive a 1998 to 2002 Honda Accord and you’re tired of holding the hood up with one hand while you work with the other, ARANA Hood Struts can feel like a small rescue you’ll appreciate every single time. You get two struts that fit Base, DX, EX, LX, SE, Coupe, and Value Series, and they match OEM numbers like 74145S87A000. Next, you’ll like the tough carbon steel and airtight build that’s rated past 50,000 cycles. Installation takes about 5 minutes with a screwdriver, so you won’t pay dealer prices. In case anything feels off, you’ve got 365-day support.
- Vehicle fit:Honda Accord 1998–2002 (hood)
- Location:Front hood
- Quantity:2-pack
- OEM replacements:74145S87A000 / D95903 / SG326010
- Install tools:Screwdriver
- Warranty/returns:365-day service
- Additional Feature:Carbon steel construction
- Additional Feature:50,000+ cycle lifespan
- Additional Feature:Airtight sealed design
PM3315 Rear Hatch Shocks for 2015-2019 Honda Fit (2-Pack)
Should your 2015 to 2019 Honda Fit’s rear hatch won’t stay up anymore, the PM3315 rear hatch shocks can bring back that safe, steady lift you’re missing. You get two struts for both sides, made to replace OEM numbers PM3315, 74820T5RA01, and 74870T5RA01, so fit worries fade fast.
Next, let’s talk install. You don’t need screws or extra hardware. You’ll prop the hatch with a rod or a friend, then pry the old bracket with a flathead screwdriver, and snap in the new arms. With 10.08 inches compressed and 16.85 extended, they lift smoothly. AiYiGu backs you with 24 months warranty.
- Vehicle fit:Honda Fit 2015–2019 (rear hatch)
- Location:Rear hatch
- Quantity:2-pack
- OEM replacements:PM3315 / 74820T5RA01 / 74870T5RA01
- Install tools:Flathead screwdriver
- Warranty/returns:24-month warranty
- Additional Feature:10.08″ compressed length
- Additional Feature:16.85″ extended length
- Additional Feature:No screws required
Rear Hatch Shocks for 2003-2011 Honda Element (2-Pack)
Should your 2003 to 2011 Honda Element’s rear hatch has started to feel heavy, slam down, or make you flinch every time you load groceries, this 2 pack of AiYiGu rear hatch shocks is designed for you. It fits DX, EX, LX, and SC trims, and substitutes OEM numbers like 4585 and 74820-SCV-A01, so you’re not guessing.
Next comes the parts that matter: 13.11 inches compressed and 22.83 inches extended. You get left and right supports, plus screws. Start each screw with a one fourth turn, then tighten fully. You’re also covered with a two year warranty.
- Vehicle fit:Honda Element 2003–2011 (rear liftgate)
- Location:Rear liftgate
- Quantity:2-pack
- OEM replacements:4585 / SG226011 / 74820SCVA01
- Install tools:Screwdriver (for included screws)
- Warranty/returns:2-year warranty
- Additional Feature:13.11″ compressed length
- Additional Feature:22.83″ extended length
- Additional Feature:Includes some screws
Rear Hatch Liftgate Struts for Honda Odyssey (2-Pack)
Should your Honda Odyssey rear hatch have started to feel like a heavy lid that won’t stay up, these Rear Hatch Liftgate Struts (2-Pack) can bring back that steady, safe lift you miss. They fit 2005-2010 Odyssey models with a non power liftgate, and they replace model 6117 cross references SG126007 and PM9019.
Because sizing matters, you get a 28.54 inch extended length and 21.29 inch compressed length for a proper arc. Next, installation stays simple, so you can swap both in minutes without special tools. Youxmoto includes two struts, and Amazon backs you with a 30 day return window.
- Vehicle fit:Honda Odyssey 2005–2010 (rear liftgate, non-power)
- Location:Rear liftgate
- Quantity:2-pack
- OEM replacements:6117 / SG126007 / PM9019
- Install tools:No special tools
- Warranty/returns:30-day return guarantee
- Additional Feature:Non-power liftgate only
- Additional Feature:21.29″ compressed length
- Additional Feature:28.54″ extended length
ARANA Rear Hatch Liftgate Struts for Honda Pilot 2003-2008
ARANA Rear Hatch Liftgate Struts fit Honda Pilot models from 2003 to 2008, and they’re a smart pick should you be tired of a liftgate that slowly sinks and makes you feel like you need a third hand. You get a true OEM-style replacement that swaps in for common part numbers like 74820S9VA01 and 74870S9VA01, so fit worries ease fast.
Next, you’ll notice the liftgate stays up on its own and even rises about 1 to 2 inches higher. Installation feels simple too: use a flathead screwdriver, remove both old struts, then install the new pair one at a time. ARANA backs you with 365-day replacement support.
- Vehicle fit:Honda Pilot 2003–2008 (rear hatch)
- Location:Rear hatch/tailgate
- Quantity:2-pack
- OEM replacements:4373 / 74820S9VA01 / 74870S9VA01
- Install tools:Flathead screwdriver
- Warranty/returns:365-day replacement support (+ 30-day returns)
- Additional Feature:Raises gate 1–2″
- Additional Feature:Fixes sagging liftgates
- Additional Feature:Strong hold-open support
Factors to Consider When Choosing Shock Lift Supports for Honda
At the time you’re choosing shock lift supports for your Honda, you need more than a “close enough” fit, because the right match keeps your hatch or hood from slipping and scaring you. So you’ll want to confirm exact vehicle fitment, match the OEM part number, and check the extended and compressed length so the struts don’t bind or fall short. Then you can focus on load force and lift for smooth, confident opening, plus material and seal quality so they don’t start leaking right at the moment you’re counting on them most.
Vehicle Fitment Accuracy
Because a lift support looks simple, it’s easy to assume any “Honda” strut will work, but vehicle fitment accuracy is what keeps your hood or hatch opening smoothly and staying safely in place. You need supports that match your exact model and year range, because small differences in mounting points can turn a quick swap into a frustrating fight.
OEM Part Number Match
Fitment gets you close, but the OEM part number gets you the exact lift support your Honda was built to use. At the moment you match that number, you’re choosing a strut made for your specific hood or hatch, so it moves smoothly and holds steady.
That match also protects you. You keep the same safety and performance standards Honda designed, so the panel doesn’t drop, twist, or slam just as you least expect it. Next, you avoid the headache stuff: bolts that won’t line up, brackets that bind, or hinges that take a beating. With the right number, installation feels like it should, simple, clean, and no mods. Finally, OEM matched supports tend to last longer because they meet or beat the original specs you started with.
Extended And Compressed Length
Although the mount points could line up, the strut can still be the wrong size, and that’s where extended and compressed length really matter. Extended length is the full stretch of the support, and it decides how high your Honda’s hood or hatch rises. In case it’s too short, it won’t open all the way. In case it’s too long, it can overextend and stress the hinges or sheet metal, which is a scary way to end a simple upgrade.
Next, compressed length is how short the strut gets when closed. You need enough room for it to fold in without binding. In the event it can’t compress properly, it might get forced, bend, or fail prematurely. So, measure carefully and match OEM specs closely for clean, confident fit.
Load Force And Lift
Once you’ve matched the extended and compressed lengths, the next thing that protects your Honda and your fingers is load force and lift. You need enough force to hold your hood, hatch, or liftgate fully open without you propping it up. Whenever the force matches the panel’s weight, it stays steady, so you don’t get that scary drop halfway through loading groceries or checking fluids.
Next, consider lift, not just holding. A higher force rating can raise heavier panels and sometimes open a bit higher than stock, which makes reach and visibility easier. But don’t go too strong, because the panel can pop up fast and feel hard to pull down. Since supports cycle thousands of times, pick force that stays consistent, so it won’t fade and sag again.
Material And Seal Quality
At the moment you open your Honda’s hood or hatch every day, the material and seal quality in your lift supports quietly decide whether it feels smooth and safe or sudden and scary. You want sturdy carbon steel because it stays strong under load, day after day. Then you need a tight, airtight seal, because even tiny gas leaks steal lifting power and invite a drop that can make your heart jump.
Next, consider how long they’ll keep that steady feel. Better sealing tech handles heavy use and can survive over 50,000 compression cycles. Also, good materials and seals fight rust and cope with heat and cold swings. Whenever everything stays sealed, your struts lift with confidence, and you can trust your hands and head are safer.
Installation Time And Tools
Strong materials and tight seals help your lift supports stay reliable, but you’ll still feel stressed in case installing them turns into a long, messy job. The positive aspect is most Honda lift supports swap fast, and you usually need only a flathead screwdriver to pop the retaining clip.
Next, plan for about 5 to 10 minutes, as long as you work calmly. Before you start, prop the hatch open with a sturdy rod, or ask a friend to hold it, because the old strut can drop suddenly. Then remove one strut at a time so the hatch stays stable. After that, snap the new support onto the ball studs until it clicks, and double check both ends lock in place.
Warranty Coverage Terms
Because lift supports work under constant pressure, a clear warranty can feel like a safety net at the moment one starts to weaken sooner than you expected. Whenever you shop for Honda lift supports, look for coverage that runs 1 to 2 years and protects you from defects in materials and workmanship, not your mistakes. Many brands add a 365-day replacement promise for quality issues, so you don’t have to argue once a strut fades prematurely.
Next, check the fine print, because most plans won’t cover damage from improper installation or misuse. Still, good support teams will help you confirm fitment and troubleshoot during the warranty, often without making you mail parts back. Finally, see whether the seller adds a 30-day return guarantee after delivery.
