Need jacks that fit your camper and make setup quick and easy? Pick from six top options covering tongue lift, corner stabilization, and electric convenience. Kohree’s 5000 lb A-frame gives strong towing lift and adjustable base heights.
Other picks include Kohree’s 9500 lb scissor pair, VEVOR’s 4000 lb electric tongue jack with manual backup, LIBRA and Lippert scissor kits, plus budget-friendly generic scissor sets.
| Kohree 5000 lb A-Frame Adjustable Trailer Jack |
| Best Adjustable A-Frame | Load Capacity: 5,000 lb | Type / Form: A-frame trailer jack | Height Range / Travel: 24″–46.5″ (adjustable; 22.5″ travel) | VIEW LATEST PRICE | Read Our Analysis |
| Kohree 9500lb RV Scissor Stabilizer Jacks (Set of 2) |
| Heavy-Duty Stabilizers | Load Capacity: 9,500 lb (set rating) | Type / Form: Scissor stabilizer jacks (set of 2) | Height Range / Travel: Retracted 4″ — Extended 24″ (max 24″) | VIEW LATEST PRICE | Read Our Analysis |
| VEVOR 4000 lb Electric Trailer Tongue Jack |
| Best Electric Tongue | Load Capacity: 4,000 lb | Type / Form: Electric tongue jack | Height Range / Travel: 9.84″ — 33.85″ operating range | VIEW LATEST PRICE | Read Our Analysis |
| LIBRA 9000lb RV Trailer Stabilizer Scissor Jack Kit |
| Premium Four-Pack | Load Capacity: 9,000 lb (per set specification) | Type / Form: Scissor stabilizer jacks (set of 4) | Height Range / Travel: Retracted 5″ — Extended 24″ | VIEW LATEST PRICE | Read Our Analysis |
| RV Trailer Camper Stabilizer Leveling Scissor Jacks |
| Quick-Deploy Pair | Load Capacity: 6,500 lb | Type / Form: Scissor stabilizer jacks (set of 2) | Height Range / Travel: Retracted 4″ — Extended 24″ (adjustable 4–24″) | VIEW LATEST PRICE | Read Our Analysis |
| Lippert 5,000 lb RV Scissor Jack Kit |
| Trusted Replacement | Load Capacity: 5,000 lb | Type / Form: Manual scissor jack kit | Height Range / Travel: Retracted 4.25″ — Extended 24″ | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Kohree 5000 lb A-Frame Adjustable Trailer Jack
Should you tow often and want a tough, no-nonsense jack that makes hitching quicker and safer, the Kohree 5000 lb A-Frame Adjustable Trailer Jack is a smart pick. You’ll like its 5,000 lb capacity and thickened steel body that resists corrosion with a galvanized finish. It lifts steadily even on rough ground and gives 22.5 inch travel with a five level base that adjusts from 24 to 46.5 inches, so it fits many trailers. The detachable ergonomic handle cuts cranking effort up to 30 percent. You can bolt it with the three hole pattern and keep it smooth with the rear grease fitting.
- Load Capacity:5,000 lb
- Type / Form:A-frame trailer jack
- Height Range / Travel:24″–46.5″ (adjustable; 22.5″ travel)
- Construction / Finish:Thickened high-strength steel, galvanized corrosion-resistant finish
- Operation Method:Manual crank via detachable side handle (hand operation)
- Intended Use / Compatibility:Compatible with RVs, horse trailers, utility trailers, A-frame tongues
- Additional Feature:Detachable extended handle
- Additional Feature:Rear grease fitting
- Additional Feature:3-hole bolt mount
Kohree 9500lb RV Scissor Stabilizer Jacks (Set of 2)
In case you want heavy-duty stability for your trailer without wrestling with weak parts, the Kohree 9500 lb scissor stabilizer jacks are built for you and your RV’s toughest moments. You get two jacks, a crank handle, and a drill bit so you can choose hand power or use a drill. Heavy steel and electrophoresis finish resist rust and wear. The smooth tooth gear lifts straight up to 24 inches and retracts to 4 inches, with a wide bow-tie base for steadiness. They suit trailers, campers, pop-ups, and work with Kohree jack pads. Kohree offers support should you require help.
- Load Capacity:9,500 lb (set rating)
- Type / Form:Scissor stabilizer jacks (set of 2)
- Height Range / Travel:Retracted 4″ — Extended 24″ (max 24″)
- Construction / Finish:Heavy-duty steel with electrophoresis surface treatment
- Operation Method:Manual crank or power drill (drill-ready; drill bit included)
- Intended Use / Compatibility:Suitable for trailers, RVs, campers, motorhomes, pop-ups; works with Kohree jack pad
- Additional Feature:Includes drill bit
- Additional Feature:Wide bow-tie base
- Additional Feature:Two-operation options
VEVOR 4000 lb Electric Trailer Tongue Jack
Assuming you tow medium to heavy trailers and want a fast, reliable way to raise and lower the tongue, the VEVOR 4000 lb electric trailer tongue jack is a strong choice for people who value ease and durability. You get 4000 lb lift capacity, so it handles RVs, horse trailers, utility trailers, and small yachts. Built from carbon steel with a protective coating, it resists splashes and outdoor wear and keeps a new-like look. The jack adjusts from 9.84 to 33.85 inches, so you can level on uneven ground. It mounts with a 90° rotating hole, has a hand crank backup, and includes a waterproof sunshade cover.
- Load Capacity:4,000 lb
- Type / Form:Electric tongue jack
- Height Range / Travel:9.84″ — 33.85″ operating range
- Construction / Finish:Carbon steel with protective coating (splash-resistant)
- Operation Method:Electric motor with included hand crank for emergency
- Intended Use / Compatibility:For RV trailers, horse/utility/yacht trailers; fits high- and low-profile trailers
- Additional Feature:Electric power operation
- Additional Feature:90° rotating mount
- Additional Feature:Sunshade waterproof cover
LIBRA 9000lb RV Trailer Stabilizer Scissor Jack Kit
Should you tow a heavy fifth wheel or a large travel trailer and want rock-steady campsite comfort, the LIBRA Heavy Duty 9000 lbs scissor jack kit is made for you. You’ll feel relief appreciating each of the four jacks holds up to 9,000 pounds and that thick 11-gauge steel resists flex. They come with an electrophoresis coating to fight rust, so they look good season after season. You get a drill-ready 3/4″ magnetic socket, a 9/16″ socket, mounting screws, drill bit, and guide sticker for easier fitting. Use them for stabilizing and leveling only, not for lifting or tire changes.
- Load Capacity:9,000 lb (per set specification)
- Type / Form:Scissor stabilizer jacks (set of 4)
- Height Range / Travel:Retracted 5″ — Extended 24″
- Construction / Finish:Thick 11-gauge steel with electrophoresis coating
- Operation Method:Manual crank; power-drill-compatible (3/4″ hex socket included)
- Intended Use / Compatibility:For RVs, campers, trailers — stabilizing/leveling (not for lifting tires)
- Additional Feature:Full installation kit
- Additional Feature:11-gauge thick steel
- Additional Feature:3/4″ magnetic socket
RV Trailer Camper Stabilizer Leveling Scissor Jacks
You’ll love these RV Trailer Camper Stabilizer Leveling Scissor Jacks provided that you want a fast, reliable way to steady and level your trailer, especially on uneven or soft ground. You’ll feel confident with a 6,500-lb capacity that handles most trailers without strain. The scissor arms use a tooth gear for straight vertical movement, so you’ll raise and lower smoothly. The bow-tie base grips soft ground, and the 4 to 24 inch adjustability covers low to high needs. You’ll crank quickly by hand with the included handle. The package has two jacks, one crank, and a one-year limited warranty.
- Load Capacity:6,500 lb
- Type / Form:Scissor stabilizer jacks (set of 2)
- Height Range / Travel:Retracted 4″ — Extended 24″ (adjustable 4–24″)
- Construction / Finish:Heavy-duty steel (finish unspecified; stable bow-tie base)
- Operation Method:Manual crank handle operation
- Intended Use / Compatibility:For RV trailers/campers — stabilizing and leveling
- Additional Feature:Bow-tie base design
- Additional Feature:1-year limited warranty
- Additional Feature:Rapid raise tooth gear
Lippert 5,000 lb RV Scissor Jack Kit
Should you want a tough, budget-friendly jack that lifts and steadies trailers without fuss, the Lippert 5,000 lb RV Scissor Jack Kit is built for you. You’ll get a manual scissor jack with a 5,000 lb capacity, 24 inch extended reach, and 4.25 inch retracted height. It fits via bolting or welding to travel trailers, fifth wheels, and utility trailers. The black powder-coat resists rust and the bow-tie base adds stability. Hardware for bolt-on mounting is included while the crank handle is sold separately. You’ll find operation simple and reliable, so you can steady your rig with confidence.
- Load Capacity:5,000 lb
- Type / Form:Manual scissor jack kit
- Height Range / Travel:Retracted 4.25″ — Extended 24″
- Construction / Finish:Robust steel with black powder-coated (rust-inhibitive) finish
- Operation Method:Manual scissor crank (handle sold separately)
- Intended Use / Compatibility:For travel trailers, 5th wheels, cargo/utility trailers (bolt-on or weld-on)
- Additional Feature:Includes mounting hardware
- Additional Feature:Bolt-on or weld-on
- Additional Feature:Handle sold separately
Factors to Consider When Choosing Rv Jacks
As you pick RV jacks, start matching load capacity needs to your RV so you never undersize the support. Next you’ll compare jack type, lift height range, and mounting compatibility to make sure the jack fits and reaches where you need it. Also check construction and finish for durability and corrosion resistance so your choice lasts through seasons and miles.
Load Capacity Needs
Pick a jack that can actually handle the weight you’ll ask it to hold, and you’ll avoid scary surprises on the road. You should match the jack capacity to the maximum tongue or corner load, then add a safety margin of 25 to 50 percent so the jack isn’t stressed. If you employ more than one jack, make sure each one covers its share of the load, since two stabilizers split side loads while a single tongue jack bears the full tongue weight. Consider about variable forces like wind, people moving, and slope, and pick a higher rated capacity to cover sudden shifts. Check lifting and retracted heights so the jack works safely at full load during travel and parking. Use a proper lifting jack for tire changes, not stabilizers.
Jack Type Selection
Start through considering about what you need the jack to do for you and your trailer. In case you want low profile stabilization to stop sway and help level, pick scissor stabilizer jacks. They sit low, spread weight, and usually reach about 24 inches while retracting to roughly 4 to 5 inches. Should you need to lift the tongue for hitching or towing, choose an A-frame or tongue jack. These provide several inches up to over 20 inches of vertical travel and list lifting capacity so you can match your trailer weight. Provided you prefer easy, fast operation, an electric tongue jack saves effort, but check power fit and keep a manual crank for backups. Finally, decide between bolt-on for easy removal and weld-on for lasting strength based on your tongue design.
Lift Height Range
You’ve already thought about which jack type fits your needs, so now let’s look at how far that jack has to move. Pick a travel range that exceeds the biggest height difference you expect between hitch and tow vehicle or between trailer and ground. Scissor stabilizers often cover about 4 to 24 inches, while tongue jacks can reach about 33 to 34 inches. Check both retracted and extended heights so the jack stows under the trailer and still reaches whenever needed. Look for adjustable or multi-level options with incremental settings for finer control on uneven ground. Make sure the range handles tongue drop whenever unhitched plus extra height for hitching, leveling, or using blocks. Also verify enough clearance for crank or motor movement throughout travel.
Mounting Compatibility
Whenever you’re fitting a new jack, the way it mounts matters as much as its lifting power, so check the mounting pattern, clearance needs, and fastener strength before you buy. You should match bolt-hole spacing or weld-on plate style to your tongue or frame so the jack sits true and shares load evenly. Also check how it turns and where the handle or motor will sit, because a jack that hits a hitch or tailgate will be more trouble than help. Confirm flange thickness and bolt ratings so bolts won’t shear and frames won’t bend under load. Provided you swap several jacks, keep mounting heights and positions consistent to avoid twist. For powered jacks, plan cable and drive access for safe routing and service.
Construction & Finish
Because your jack has to hold your rig steady day after day, choosing heavy, high-strength steel and a tough finish matters more than you might believe. You should look for thicker gauges or clear load ratings so the leg won’t bend under pressure. Also favor corrosion-resistant finishes like galvanization, electrophoresis, or powder coating to stop rust whenever you camp in wet places. Check for sealed moving parts and grease fittings since enclosed gear housings and greasable joints cut wear and keep things working longer. Inspect base plates and feet for wider, treated designs or anti-corrosion plating so the jack won’t sink or deteriorate on dirt. Finally, consider UV and water resistant covers on exposed parts to slow aging from sun and moisture and keep strength intact.
Operation & Maintenance
You picked a jack built from tough steel and a weatherproof finish, and now you’ll want to make sure it works smoothly every time you use it. Pick an operation method that fits how often you camp. Should you raise and lower the trailer a lot, choose electric or drill-compatible jacks. They save time and strain. Next, inspect the drive mechanism and lubrication points. Smooth-tooth or worm-gear systems with grease fittings cut wear and give steady lifts. Check for an emergency manual override so you can crank the jack should power or your drill fail. Follow a maintenance routine: clean moving parts, grease fittings, tighten fasteners, and protect finishes from rust. Finally, test the jack under load in a safe spot to confirm smooth travel and reliable locks.
